Measuring Forehead Temperature; Measuring Object Temperature - Beaba THERMOSPEED JPD-FR412 Instructions Manual

2. Take the probe cover off from the thermometer
before measuring the ear temperature.
3. Press the Power button to power on the
thermometer.
4. The "Ear" symbol is displayed on the screen.
5. Switch between "adult" and "child" modes
by pressing Mode button. symbol shows up in
"child" mode.(child mode : from 0 -12 years old)
6. Insert the temperature probe into the ear canal.
7. Press and release the Measure button. The
ear temperature reading will be displayed on
the screen instantly.
Note: Children under 1 year: Pull the straight back.
Children aged 1 year to adult: Pull the ear up and back.
34.6° 36.8°
Do not force the thermometer into the ear canal. Otherwise, the ear
canal may get injured.
When taking the temperature on an adult, gently pull the ear up and
back to make sure the ear canal is straight, so that the temperature
probe can receive an infrared ray from the eardrum.
Be careful when taking temperature on a child, whose ear canal is
small.

Measuring Forehead Temperature

1.Put the cover on the probe of thermometer.
2.Press the Power button to power on the thermometer.
The " " symbol is displayed on the screen.
3.Switch between "adult" and "child" modes by
pressing Mode button. "
"child" mode. .(child mode : from 0 -12 years old)
4.Point the thermometer probe to the center of
the forehead, about " 0-1-cm "away from the skin
surface.
Make sure that the forehead is free of hair
and perspiration.
4.Press and release the Measure button for 1
second. The temperature reading will be displayed
on the screen instantly.
5.If no activity is detected, the thermometer will
power off automatically in 10 seconds.
" symbol shows up in

Measuring Object Temperature

1. Put the cover on the probe of thermometer.
2. Press the Power button to power on the
thermometer.
3. Press the Mode button, the thermometer enters
the Object mode. The "
the screen.
4. Point the thermometer probe to the center of the
object, about " 1-3cm" away from the object surface.
5. Press and release the Measure button for 1 second. The temperature
reading will be displayed on the screen instantly.
6. If no activity is detected, the thermometer will power off automatically in 10
seconds.
After a measurement
(1) After each measurement, you can enter the recall mode and query earlier
temperature readings. For more details, see «Recall 20 memories» in the
preceding table.
(2) After each measurement, clean the temperature probe with a soft cloth,
and put the thermometer in a dry and well-ventilated place.
It is dangerous to make a self-diagnosis or self-treatment based on the
obtained measurement results. For such purposes, please consult a
doctor.
Notes:
(1) The thermometer is suitable for an indoor environment without strong air
convection (for example, winds from a fan, an air-conditioner, or a heater)
between the thermometer and the person.
(2) Make sure that the ear canal is clean and dry before starting a measurement.
It is recommended to clean the ear canal with a cotton swab if any dirt exists.
Otherwise, the temperature probe may be polluted and temperature readings
may be inaccurate.
(3) Do not hold the thermometer for a long time, because it is sensitive to the
ambient temperature.
(4) Make sure the sense head is free of foreign matters before use;
(5) Make sure the forehead has no sweat and no hairs covered before measure
the forehead temperature; otherwise, the result could be incorrect;
(6) No intense emotion or strenuous exercises before measuring;
(7) After measuring the data once, you should wait for the backlight to turn off
and measure the next data.
" symbol is displayed on