Advertisement
2020-12-11 00:44
Yes.
VEConfigure keeps giving the warning 'Device must be reset'
This message is a bug. There is no need to reset the device. This erroneous indication is solved in
firmware version xxyy403.
I get a lot of Low battery pre-alarm warnings ?
Solved by updating to xxyy403 or higher.
Does Hub-4 work for parallel systems?
Yes, Hub-4 works for systems where multiple Multis or Quattros are installed on the same phase and
configured to operate in parallel.
DISQUS
View the discussion thread.
From:
https://www.victronenergy.com/live/
Permanent link:
https://www.victronenergy.com/live/system_integration:hub4_grid_parallel?rev=1456310763
Last update: 2016-02-24 11:46
Victron Energy - https://www.victronenergy.com/live/
13/13
- Victron Energy
Hub-4 / grid parallel - manual DEPRECATED
Advertisement
