Picture Tube And Bezel Complete Assembly (20 Inch) - Sony TRINITRON PVM-14L1 Service Manual

1-6-5. Picture Tube and Bezel Complete Assembly (20 inch)

. Remove the cabinet and rear panel. (Refer to 1-6-1.)
. Remove the Q block assembly. (Refer to 1-6-2.)
. Remove the A board. (Refer to 1-6-3.)
. Remove the C board. (Refer to 1-6-4.)
1 Deflection yoke
Cushion
3 Four self tapping screws (M5)
A
B
Cushion
PVM-14L1/14L1MDE/20L1
SSM-14L1/20L1
4 Remove the CRT shield assembly
in the direction of the arrow A.
6 Picture tube
B
5 Remove the bezel complete assembly
in the direction of the arrow B.
2 Prepare a work bench on the cushion
and place the CRT and bezel assembly
on the work bench.
Note:
Prepare a work bench that can protect surface
of CRT and can withstand the weight of the CRT.
Cushion
Bench
1-11