Sony VPL-VW10HT Service Manual page 20

The INPUT SETTING Menu
Preset signals
Memory Preset signal fH fV Sync SIZE
No. (kHz) (Hz) H
1 Video 60 Hz 15.734 59.940 H-neg V-neg 1572
2 Video 50 Hz 15.625 50.000 H-neg V-neg 1864
3 15k RGB/Component 60 Hz 15.734 59.940 SonG 1572
4 15k RGB/Component 50 Hz 15.625 50.000 SonG 1864
5 HDTV 33.750 60.000 SonG 2200
640 × 350 VGA mode 1
6 31.469 70.086 H-pos V-neg 800
7 VGA VESA 85 Hz 37.861 85.080 H-pos V-neg 832
640 × 400 PC-9801 Normal 24.823 56.416 H-neg V-neg 848
8
9 VGA mode 2 31.469 70.086 H-neg V-pos 800
10 VGA VESA 85 Hz 37.861 85.080 H-neg V-pos 832
640 × 480 VGA mode 3
11 31.469 59.940 H-neg V-neg 800
12 Macintosh 13" 35.000 66.667 SonG 864
13 VGA VESA 72 Hz 37.861 72.809 H-neg V-neg 832
14 VGA VESA 75 Hz 37.500 75.000 H-neg V-neg 840
15 VGA VESA 85 Hz 43.269 85.008 H-neg V-neg 832
800 × 600 SVGA VESA 56 Hz 35.156 56.250 H-pos V-pos 1024
16
17 SVGA VESA 60 Hz 37.879 60.317 H-pos V-pos 1056
18 SVGA VESA 72 Hz 48.077 72.188 H-pos V-pos 1040
19 SVGA VESA 75 Hz 46.875 75.000 H-pos V-pos 1056
20 SVGA VESA 85 Hz 53.674 85.061 H-pos V-pos 1048
832 × 624 Macintosh 16" 49.724 74.550 H-neg V-neg 1152
21
1024 × 768 XGA VESA 43 Hz 35.524 43.479 H-pos V-pos 1264
22
23 XGA VESA 60 Hz 48.363 60.004 H-neg V-neg 1344
24 XGA VESA 70 Hz 56.476 69.955 H-neg V-neg 1328
25 XGA VESA 75 Hz 60.023 75.029 H-pos V-pos 1312
26 XGA VESA 85 Hz 68.677 84.997 H-pos V-pos 1376
1152 × 864 SXGA VESA 70 Hz 63.995 70.019 H-pos V-pos 1472
27
28 SXGA VESA 75 Hz 67.500 75.000 H-pos V-pos 1600
29 SXGA VESA 85 Hz 77.487 85.057 H-pos V-pos 1568
1152 × 900 Sunmicro LO
30 61.795 65.960 H-neg V-neg 1504
31 Sunmicro HI 71.713 76.047 C-neg 1472
1280 × 960 SXGA VESA 60 Hz 60.000 60.000 H-pos V-pos 1800
32
33 SXGA VESA 75 Hz 75.000 75.000 H-pos V-pos 1728
1280 × 1024 SXGA VESA 43 Hz 46.433 43.436 H-pos V-pos 1696
34
35 SGI-5 53.316 50.062 SonG 1680
36 SXGA VESA 60 Hz 63.974 60.013 H-pos V-pos 1696
37 SXGA VESA 75 Hz 79.976 75.025 H-pos V-pos 1688
Progressive
43 480/60p 480/60p ( ) 31.470 60.000 SonG 774
component
Progressive
44 575/50p 575/50p ( ) 31.250 50.000 SonG 920
component
45 1080/50i 1080/50i 28.130 50.000 2640
47 720/60p 720/60p 45.000 60.000 1650
48 720/50p 720/50p 37.500 50.000 1980
49 1080/48i 1080/48i 27.000 48.000 2750
26
(GB)
After the data has been recalled from the preset
memory about the following signals, you can use
these preset data by adjusting SIZE H. Make fine
adjustment by adjusting SHIFT.
Signal Memory No. SIZE H
Super Mac-2 23 1312
SGI-1 23 1320
Macintosh 19" 25 1328
Macintosh 21" 28 1456
Sony News 36 1708
PC-9821 36 1600
1280 × 1024
WS Sunmicro 37 1664
Note
A part of the screen is displayed in black depending
on the aspect ratio of the input signal.
The adjustable items in the VIDEO
MEMORY
Items which can set in the VIDEO MEMORY are:
• "CONTRAST", "BRIGHT", "COLOR", "HUE",
"SHARP", "RGB ENHANCER", "D.PICTURE",
"COLOR TEMP", "COLOR SYS" and "DRC-MF"
in the PICTURE CTRL menu.
• "ASPECT", "SCAN CONV", "V SCROLL" and
"TITLE AREA" in the INPUT SETTING menu.
The SET SETTING Menu
The SET SETTING menu is used for changing the
settings of the projector.
INPUT-A
SET SETTING
STATUS: ON
INPUT-A: COMPONENT
INPUT-B: COMPONENT
LANGUAGE: ENGLISH
POWER SAVING: OFF
SIRCS RECEIVER: FRONT&REAR
STATUS (on-screen display)
Sets up the on-screen display.
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays except for the
menus, a message when turning off the power,
and warning messages.
INPUT-A
Selects the computer, component, DTV YP P or
B R
DTV GBR signal input from the INPUT A
connectors.
Note
If the setting is not correct, "Please check INPUT-A
setting." appears on the screen and the color of the
picture becomes strange or the picture is not
displayed.
INPUT-B
Selects the computer, component, DTV YP P or
B R
DTV GBR signal input from the INPUT B
connectors.
Notes
• If the setting is not correct, "Please check INPUT-B
setting." appears on the screen and the color of the
picture becomes strange or the picture is not
displayed.
• Set the progressive component signal, e.g. DVD, to
"DTV YP P "; 15k RGB signal, e.g. game
B R
machines, to "COMPUTER".
The SET SETTING Menu / The INSTALL SETTING Menu
LANGUAGE
Selects the language used in the menu and on-screen
displays.
Available languages are: English, French, German,
Italian, Spanish, Japanese and Chinese.
POWER SAVING
When set to ON, the projector goes into the power
saving mode if no signal is input for 10 minutes.
The power saving mode is canceled when a signal is
input or any key is pressed.
SIRCS RECEIVER
Selects the remote control detectors (SIRCS receiver)
on the front and rear of the projector.
FRONT & REAR: Activates both the front and rear
detectors.
FRONT: Activates the front detector only.
REAR: Activates the rear detector only.
The INSTALL SETTING
Menu
The INSTALL SETTING menu is used for changing
the settings of the projector.
INPUT-A
INSTALL SETTING
KEYSTONE MEM: OFF
DIGIT KEYSTONE:01
INSTALLATION: FLOOR-FRONT
CINEMA BLACK:ON
LAMP TIMER: 234h
KEYSTONE MEM
ON: DIGIT KEYSTONE setting is stored.
The data is retrieved when the projector power is
turned on. The setting will remain the same every
time.
OFF: DIGIT KEYSTONE is reset to 0 when the
power is turned on the next time.
27
(GB)