Sony VPL-VW10HT Service Manual page 11

Features
Features
High brightness, high picture quality
• New, wide LCD panel
The new high-resolution wide LCD panel (1366 ×
768 dots) provides higher uniformity, reduced ghosts
and an improved contrast ratio.
• High-brightness – 1000 ANSI lumens
The LCD panel with its new 200W UHP lamp,
optical unit and lens achieves a high brightness of
1000 ANSI lumens (16:9 projection), allowing for
improved home viewing.
• High-quality image
In addition to the new wide LCD panel, a variety of
functions are now available in the projector. These
include DRC-MF (Digital Reality Creation
Multifunction) (Sony's proprietary high-quality
image technology); 3-D Gamma Correction,
providing excellent uniformity; Cinema Black Mode,
a mode that reduces the black level according to the
input source/projection environment; and 3-D YC
Separation/DNR (NTSC), a feature that reproduces a
clear image without noise.
High-adaptability in the home
environment
• Reduced noise
The exhaust opening at the front is connected to an
internal fan and air duct. This means the distance
from the fan to the exhaust opening is long,
significantly reducing fan noise.
• Flexible setup
The projection lens has a short focus (90 inches with
2.9m (9.5 feet) (16:9)). The digital keystone
correction function allows projection at a wide angle.
The projector's white color goes with any color
(ceilings, walls, etc.).
Wide Screen/DTV/High Definition
Television
• Wide Screen
This projector utilizes a 16:9 aspect ratio LCD panel,
allowing seven screen modes (ZOOM, FULL,
SUBTITLE, WIDE ZOOM, etc.) using all panel
pixels (1366 × 768).
.........................................................................................................................................................................................................
1) NTSC is the color system used when playing back a video recorded in the NTSC format on an NTSC
4.43
8
(GB)
It allows NORMAL THROUGH mode and FULL
THROUGH mode as the through mode that
reproduces a sharp image with one-to-one mapping.
• DVD, DTV, High-Definition Television
The projector's super-precise image exceeds 3.14
million pixels. It is also compatible with next-
generation DTV (digital TV) and high-definition
television signals. Combined with a tuner or a
MUSE decoder (optional), you can enjoy DTV,
high-definition television, high- definition LD, etc.
Video Memory
The projector has a video memory function. The user
can store up to 6 settings (image quality, aspect,
temperature color, DRC-MF, etc.) according to the
input source. The user can directly recall any setting
from the Remote Commander.
Multi scan compatibility
• Scan converter built-in
This projector has a built-in scan converter which
converts the input signal within 1366 × 768 pixels.
• Input signals
The projector can accept the following video signals:
Composite, S-video, Component, Progressive
component, DTV (480i/p, 720p/1080i), HDTV, 15k
RGB, VGA, SVGA, XGA and SXGA.
• Compatible with six color systems
NTSC , PAL, SECAM, NTSC 1) , PAL-M or
3.58 4.43
PAL-N color system can be selected automatically or
manually.
.......................................................................................
• VGA, SVGA, XGA and SXGA are registered trademarks
of the International Business Machines Corporation,
U.S.A.
• VESA is a registered trademark of the Video Electronics
Standard Association.
• IBM and PC/AT are a trademark and a registered
trademark of the International Business Machines
Corporation, U.S.A.
• Macintosh is a registered trademark of Apple Computer,
Inc.
• NEC is a registered trademark of NEC Corporation.
• PC-98 is a trademark of NEC Corporation.
system VCR.
4.43
Location and Function of
Controls
Front/Left Side
3 2 1 8
4 5 7
6
Rear/Right Side/Bottom
0 9
qa
qs qd qf
Location and Function of Controls
1 Zoom ring
Adjusts the size of the picture.
2 Focus ring
Adjusts the picture focus.
3 Ventilation holes (exhaust)
4 Lens
Remove the lens cap before projection.
5 Front remote control detector (SIRCS receiver)
6 Adjusters
When a picture is projected on the out of the screen,
adjust the picture using these adjusters.
For details on how to use the adjusters, see "How to use
the adjuster" on page 10 (GB).
7 Connector panel
For details, see page 12 (GB).
8 Control panel
For details, see "Control panel" on page 11 (GB).
9 AC IN socket
Connects the supplied AC power cord.
0 Rear remote control detector (SIRCS receiver)
qa Lamp cover
qs Rear adjusters
qd Ventilation holes (intake)/air filter cover
About ventilation holes
Notes
• Do not place anything near the ventilation holes as it
may cause internal heat build-up. Do not put your
hand near the ventilation holes, or you may be
burned.
• Clean the air filter every 300 hours to ensure
optimal performance.
For details, see "Cleaning the Air Filter" on page 35
(GB).
qf Adjuster buttons
9
(GB)