Wet Shaving - Philips AT9 Series Manual

ENGLISH
8
Charging in the charging stand (AT941/AT940 only)
1 Put the small plug in the charging stand.
2 Put the adapter in the wall socket.
3 Place the shaver in the charging stand.
The charging light shows the charging status of the shaver (see
,
section 'Charge indications' in this chapter).
Using the shaver
Note: This shaver can be used in the bath or shower. It can therefore not
be used directly from the mains for safety reasons.
Shaving tips and tricks
- This shaver is suitable for both wet and dry use. Use the shaver
with shaving gel or foam for extra skin comfort, or use the shaver
dry for extra convenience.
Note: We advise you to use the shaver with shaving gel or foam when you
use it for a wet shave. Do not use thick shaving cream or shaving oil with
this shaver.
- For optimal shaving results, make circular movements during use.
- The shaver is waterproof and can be used in the bath or shower.
- Your skin may need 2 or 3 weeks to get accustomed to the Philips
shaving system.

Wet shaving

1 Apply some water to your skin.
2 Apply shaving foam or shaving gel to your skin.
3 Rinse the shaving unit under the tap to ensure that the shaving
unit glides smoothly over your skin.
4 Press the on/off button once to switch on the shaver.
5 Move the shaving heads in circular movements over your skin.