Shaving Tips And Tricks; Wet Shaving - Philips QS6141/33 User Manual

1 To use the precision side of the trimming head, simply turn the
trimming head until the precision side points towards the front of
the appliance.
2 Press the trimming head on/off button to switch on the trimming
head.
3 Hold the appliance with the trimming head pointing upwards and
make downward strokes with the precision trimming head.
Shaving
Before you use the shaving head, always check it for damage or wear. If
the shaving head is damaged or worn, do not use it, as injury may occur.
Replace a damaged shaving head before you use it again (see chapter
'Replacement').

Shaving tips and tricks

- The shaving head is suitable for both wet and dry use. Use the shaving
head with shaving gel or foam for extra skin comfort, or use the
shaving head dry for extra convenience.
Note: We advise you to use the shaving head with shaving gel or foam when
you use it for a wet shave. Do not use thick shaving cream or shaving oil with
this shaver.
- Make sure that the shaving head is in full contact with the skin.
- You can switch on the shaving head while the trimming head is
operating. If you do this, the trimming head is switched off immediately.
- Your skin may need 2 or 3 weeks to get accustomed to the Philips
shaving system.

Wet shaving

1 Apply some water to your skin.
ENGLISH
11