Rom Check; Sleep - Sony E-mount SEL200600G Service Manual

(8) ROM CHECK

• Check the data stored on the Main Board.
Subject
Operation on Lens side
Shooting Mode of the camera P mode (Program Auto)
Checking Method
1. Click the [ROM CHECK] button in the Adjustment and Inspec-
tion.
2. Data check is performed, and the check result is displayed in the
message area.
[].[].[].[]
Not required
Not required
Result of data check

(9) SLEEP

• Set the switch to initial position.
• Perform final check.
Subject
Operation on Lens side
Shooting Mode of the camera P mode (Program Auto)
Checking Method
1. Set the switch position of the lens as follows.
• Focus-mode switch
• Focus-range limiter
• SteadyShot switch
• SteadyShot mode switch : MODE1
2. Click the [SLEEP] button in the Adjustment and Inspection.
3. "PLEASE CHANGE ZOOM TO WIDE" is displayed, set the
zooming ring to the WIDE end (focal length: 200 mm), press
the ENTER key.
Zooming ring
4. "SW POSITION CHECK OK" is displayed, press the ENTER
key.
5. Perform final check.
6. When the final check is completed, " FINAL CHECK END."
is displayed in the message area.
5-41
SEL200600G
Not required
• Focus-mode switch
• Focus-range limiter
• SteadyShot switch
• SteadyShot mode switch
• Zooming ring
: AF
: FULL
: ON
SYS SET