Specifications - Maxwell VWC 4000 Series Manual

1.3

SPECIFICATIONS

Note: Rated capacity and chain speed is based on the chainwheel for 10mm chain. The performance may
vary by up to ±10% when other size chainwheels are used.
Maximum stud link chain size
Maximum short link chain size
Maximum pull capacity at chainwheel
Chain speed (at 200kg load)
Continuous pull capacity at chainwheel
Current at continuous pull rating
Motor power
Weight of windlass
Chain speed (at 200kg load)
Continuous pull capacity at chainwheel
Current at continuous pull rating (@ 400V)
Current at start up (@ 400V DOL)
Motor power
Weight of windlass
Chain speed (at recommended flow)
Recommended hydraulic oil flow
Maximum hydraulic oil flow
Continuous pull capacity at chainwheel
Maximum hydraulic oil pressure
Motor port size (pressure and return)
Case drain port size
Minimum size of oil supply/return lines
Minimum size of case drain line
Weight of windlass
General
24V DC Drive
AC Drive
Hydraulic Drive
4
12.5mm (VW only)
14mm – VW
12.5mm – VWC VWCLP
1818kg (4000lb)
15m/min (49ft/min)
420kg (925lb)
80A
2kW (2.7HP)
65kg (143lb)
13m/min (44ft/min)
715kg (1753lb)
6.2A
41A
3kW (4HP)
100kg (220lb)
14 m/min (46 ft/min)
50 l/min (13.2 USgal/min)
61 l/min (17.7 USgal/min)
1818 kg (4000 lb)
103.4 bar (1500psi)
1 1/16" - 12 UN
¼" BSP
20mm (3/4")
6mm (1/4")
47kg (104lb)