Multi Slider – User Manual
1.3 Mounting and Dismounting on Slider
Mounting Bracket
Together with the Control Unit comes a specialy designed mounting bracket to be mounted
on the carriage of the Slider System.
If you have bought the Control Unit as standalone device you first need to fix the mounting
bracket on your slider system with two countersunk screws.
If you have bought the set with Multi Slider the mounting plate is already fixed on the slider
carriage.
Mounting of Control Unit
To mount the Control Unit on the Mounting Bracket, first push the Control Unit on the
mounting bracket so it is aligned with the hooks, then push the Control Unit to the right side
as shown in picture till the snap-fit is in place.
Dismounting of Control Unit
To dismount the Control Unit from the Mounting Bracket, first push down the snap-fit with a
finger and move the Control Unit to the left while still holding down the snap-fit.
Copyright © 2017 Waterbird Systems GmbH
www.waterbird.at
- 4 -