Control Unit Itsc1000; Technical Data - Waterbird ITSC1000 User Manual

Multi Slider – User Manual

1. Control Unit ITSC1000

The ITSC1000 Control Unit is a controller for timelapse and digital motion control for video
and photo equipment. It allows to control up to 3 industrial class stepper motors and the
triggering of shutter and focus of a connected camera. Most models of popular cameras are
supported. Auxiliary input and output port for light control and motor control via an analog
voltage is also available.
For controlling the outputs the Control Unit has a built in Bluetooth® Smart 4.2 BLE compliant
module that allows the connection to a BT LE (Low Energy or 4.0 or higher) capable
Smartphone or Tablet. Applications for controlling the Unit are available for Android™ and iOS
powered devices on App Stores.

1.1 Technical Data

Operating Parameters
Temperature Range
Maximum Relative Humidity
Ports & Connection
Supply Connector
Supply Voltage
Supply Current
Motor Output
Motor Type
Camera Trigger Port
Auxiliary Port
USB Port
Copyright © 2017 Waterbird Systems GmbH
www.waterbird.at
20°C to +50°C (-4°F to 122°F)
90%, noncondensing
5.5/2.1mm or 5.5/2.5mm (Outer/Inner diameter)
DC barrel - center positive
9 –16 Vdc stabilized voltage
Source shall be capable of providing minimum 2A
3 x Molex 22-05-3041
(fitting to Motor Connector Molex 22-01-3047)
Bipolar 4-wire stepper Motor
maximum 12V and 1,4A rated recommended
with a minimum isolation voltage of 24V
2,5mm (3/32") Stereo Klinke / TRS
Sleeve: GND, Ring: Focus, Tip: Shutter
Internal pull-up 3,3V , Maximal Voltage: 5Vdc
3,5mm (1/8") Stereo Klinke / TRS
Sleeve: GND, Ring: Aux 2 In/Out, Tip: Aux 1 In/Out
Internal pull-up 3,3V , Maximal Voltage: 5Vdc
USB Micro B
Used for Firmware Updates and future use
Max Voltage 5Vdc, no supply of motors via USB
- 1 -