Table of Contents
Advertisement
Multi Slider – User Manual
2.4 System Control
Once the system is initialized, speed and acceleration can be configured as needed and the
slider can be accurately positioned within the initialized endpoints.
The "STOP" button immediately stops the motor with a fast deceleration ramp.
With "HOME" and "END"-buttons the slider can be sent to the initialized endpoints.
The position slider offers a live view of the current slider position. Additionally it can be used
to send the motor to a dedicated position within the initialized endpoints.
With the touch-and-hold buttons "<<<" and ">>>" the motor moves into the dedicated
direction as long as the button is pressed.
Emergency Stop
For emergency stop use the white reset button on the Control Unit (cf. 1.2-6). This can also be
used when mobile App is not connected to the Control Unit.
Keep in mind that emergency stop releases power from the motor, therefore in vertical mode
motor is not actively held in position. This means that high loads can move downwards, forced
by gravity.
Copyright © 2017 Waterbird Systems GmbH
www.waterbird.at
Speed and Acceleration Control
For speed and acceleration adjustment there is a slider for rough
configuration, and for high accurate adjustment "+/-" - buttons
can be used.
The acceleration value is also used for deceleration when moving
to a target position.
Speed and acceleration values can also be changed during motor
movement and those settings are even valid for features like Ping-
Pong and Step-By-Step mode.
Positioning
The "RESET" button clears the position initialization and new
endpoints have to be configured.
- 11 -
Advertisement
Table of Contents
