Step 10 Install Floppy Drive - American Megatrends Super Voyager PCI-II User Manual

Step 10 Install Floppy Drive

J25 is a 34-pin dual-inline berg. Connect the cable from the floppy drive to J25. The onboard floppy controller cannot be used if a hard disk
adapter card with floppy controller is installed. The cable and the connector are shown below:
The motherboard supports 3½" and 5¼" floppy disk drives in low density (360 KB or 720 KB) and high density (1.2 MB, 1.44 MB, or 2.88
MB). You can attach either one or two floppy drives.
Chapter 3 AMIBIOS and WINBIOS
36