Replacement Of Baffle; Removing The Door - Masport Bowden Wood Stacker Operating Instructions Manual

2. REPLACEMENT OF BAFFLE

The 6mm thick steel baffle helps to retain the heat in the
firebox by lengthening the path of the flame so that they do
not go straight up the flue.
Over time, the baffle will begin to sag a little due to the
excessive heat. This will not affect the way the fire burns.
Eventually the baffle will burn through (5+ years) and if so will
need to be replaced.
To remove/install the baffle:
1) Remove the brick retainer and bricks.
2) Raise the rear of the baffle, bringing it forward enough
to clear the rear support rods. Drop the baffle down.
3) Raise the front of the baffle, tilting it back so that it
clears the front support rods.
4) Once clear of the support rods, pull the baffle out
through the door opening.
5) Repeat steps 1 to 4 in reverse.

3. REMOVING THE DOOR

To remove the door:
1) Open the door until it rests against the door stop.
2) Lift the door up and over the top end of the vertical
hinge rod.
3) Lower the door and slide off the bottom end of the
hinge rod.
7