American Megatrends MegaDual User Manual page 86

PCI/PnP Setup,
Continued
Allocate IRQ to VGA Set this option to Yes to allocate an IRQ to a VGA adapter card that uses the PCI local
bus. The settings are Yes or No. The Optimal and Fail-Safe default settings are Yes.
USB Controller This option enables or disables the onboard USB controller. The settings are Enabled or
Disabled. The Optimal and Fail-Safe default settings are Enabled.
Legacy USB Controller Set this option to Enabled to use the USB devices during boot and while using
DOS. The settings are Enabled or Disabled. The Optimal and Fail-Safe default settings are
Disabled.
Onboard LAN Controller This option enables or disables the onboard LAN controller. The settings are
Enabled or Disabled. The Optimal and Fail-Safe default settings are Disabled.
Onboard SCSI Controller This option enables or disables the onboard SCSI controller. The settings are
Enabled or Disabled. The Optimal and Fail-Safe default settings are Disabled.
PCI Latency Timers Press <Enter> to access the sub screen to view the PCI latency timing information.
80 MegaDual PCI Motherboard User's Guide
Cont'd