Keyspan USB Twin Serial Adapter User Manual page 8

Keyspan:USB Twin Serial Adapter for Mac OS-v1.9 User Manual
Step 3
-
Check the Keyspan Serial Assistant
Now that your serial device is connected to the Keyspan adapter, you should check to see if the
Keyspan serial port is installed correctly.
To do this, open the Keyspan Serial Assistant
Keyspan Serial Assistant, you will see the following window:
If your Keyspan hardware and software are installed correctly, the 'Serial Adapter Status' text
box will report 'Driver and USA-28X Device found OK' or '...Renumerating...Done'.
If you see either of these messages, proceed to Step 4. If you do not receive either of these
messages, proceed Problem Solving
(continued on next page...)
This User Manual applies to the Keyspan USB Twin Serial Adapter Software for Mac OS.
(located in Control Panels). When you open the
the Keyspan Serial Assistant window
section in this manual
(rev 02may12JA)
Page 8