Table of Contents
Advertisement
EVORA
Back-to-Wall Toilet Suite
TM
BEFORE YOU BEGIN
Before proceeding with installation, please read these instructions carefully
to familiarise yourself with the required tools, materials and installation
sequences. Please leave these instructions for the consumer after
installation.
Prior to installation, inspect the toilet to ensure that no damage has
occurred in transit. If damage has occurred, or a visible defect exists,
do not proceed with installation, and advise your supplier immediately.
CAUTION: Risk of personal injury or product damage. Handle
with care. Vitreous china can break or chip if the product is handled
carelessly.
Observe all local plumbing and building codes. Installation shall be in
accordance with AS/NZS 3500 and AS/NZS 6400.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply shut-off valve below the
cistern, install one before installing the new toilet.
Install sufficient backing behind the finished wall to provide a secure
material for the anchoring devices.
Water supply hose not supplied. Your plumber can provide a suitable
hose of sufficient length from the shut-off valve to the tank inlet.
WARNING: Ensure that no part of the cistern inlet hose is submerged in water.
INSTALLATION INSTRUCTIONS
2
ENGLEFIELD
ENGLEFIELD
Advertisement
Table of Contents
