Kohler Englefield EVORA Back-to-Wall Installation Instructions Manual page 8

EVORA
Back-to-Wall Toilet Suite
TM
CISTERN INSTALLATION - TOP REAR ENTRY
1
Securely install the bung into the bottom inlet of the cistern. Place
the washers over the fixing screws and locate in cistern fixing holes.
Bung
Seal
Washer
Nut
2
Position the cistern on the pan
by centering the gasket on the
pan inlet. Securely tighten the
screws so the cistern is level.
4
Insert capping plugs into the side entry holes in the pan.
5
Connect the supply hose to the shut-off valve to test the system
for leaks. Shut off the water supply and disconnect the hose.
Gasket
Screw
Pan Inlet
INSTALLATION INSTRUCTIONS
3
Connect the supply hose to
the cistern inlet and connect the
hose to the water supply
shut-off valve.
8
Skip this page if installing a
bottom inlet cistern configuration.
Fixing Screw
Washer
Seal
Captivated Nut
(in pan)
Cistern Inlet
Hose
(supplied)
Side Entry Holes
ENGLEFIELD