American Megatrends Excalibur PCI User Manual page 23

Step 1 Set Switches and Jumpers,
J5 Select Enhanced Parallel Port DMA Acknowledge
J3 is a three-pin header that selects the parallel port DMA Acknowledge line.
J4 Password LED Select
J4 is a three-pin berg that selects the Password LED.
The end user must enter the correct system password if the Password LED is blinking. If the password LED blinks,
the system has experienced no system activity during the length of time specified in Power Management Setup.
The AMIBIOS system password feature and AMIBIOS Power Management feature must be enabled before the
Password LED will blink when the correct system password must be entered by the end user.
Excalibur PCI Pentium ISA Motherboard User's Guide
Continued
J3 Pin Setting
Short Pins 1-2
Short Pins 2-3
J4 Pin Settings
Short Pins 1-2
Short Pins 2-3
DMA Channel
DACK1
DACK3 (Factory setting)
LED selected
Front panel power LED is Password
LED.
(Factory setting).
Separate Password LED using P32
23