American Megatrends Excalibur PCI User Manual page 78

Peripheral Setup,
Continued
On-Board Floppy Drive
This option enables the use of the floppy drive controller on the motherboard (if installed). The settings are Enabled or
Disabled.
On-Board IDE Drive
This option enables the use of the IDE controller on the motherboard (if installed). The settings are Enabled or
Disabled.
First Serial Port Address
IRQ4 is used for the first serial port (COM1). This option enables serial port 1 on the motherboard (if installed). The
settings are 2E8h.
Second Serial Port Address
IRQ3 is used for the second serial port (COM2). This option enables serial port 2 on the motherboard, if installed. The
settings are 2E8h.
Parallel Port Address
IRQ7 is used for the parallel port (LPT1). The IRQ can be changed to IRQ5. This option enables the parallel port on
the motherboard, if installed. The settings are 278h.
IRQ Active State
This option specifies if the parallel and serial port IRQs are active high or active low. The settings are Low or High.
Parallel Port Mode
This option specifies the parallel port Mode. The settings are Normal or Extended.
Chapter 6 WinBIOS Setup
74