Eisa Nmi Messages - American Megatrends Enterprise-III User Manual

EISA AMIBIOS Error Messages
EISA CMOS Checksum
Failure
EISA CMOS inoperational
Expansion Board not ready at
Slot X, Y, Z
Fail-Safe Timer NMI
Inoperational
ID information mismatch for
Slot X, Y, Z.
Invalid Configuration
Information for Slot X, Y, Z.
Software Port NMI
Inoperational

EISA NMI Messages

BUS Timeout NMI at Slot n
(E)nable (D)isable Expansion
Board?
Expansion Board Disabled at Slot
n
Expansion Board NMI at Slot n
Fail-Safe Timer NMI
Software Port NMI
Enterprise-III EISA VLB Motherboard User's Guide
Error Message
The Checksum for EISA CMOS is incorrect. Replace
the EISA Extended CMOS RAM battery.
Read/Write error in extended CMOS RAM. The battery
may need to be replaced.
Cannot find the adapter card in Slot X, Y, or Z. Make
sure the adapter card is in the correct slot and is
seated correctly.
Devices that depend on the fail-safe NMI timer will not
operate correctly.
The ID of the EISA Adapter Card in Slot X, Y, or Z
does not match the ID in EISA CMOS RAM.
The configuration information for EISA Adapter Cards
X, Y, or Z is not correct. The adapter card in this slot
cannot be configured. Run the ECU.
The software port NMI is not working.
EISA NMI Message
Bus Timeout NMI at Slot n.
Type E to enable the adapter card that had an NMI
or D to disable it.
The adapter card in Slot n is disabled.
An expansion board NMI occurred in Slot n.
Fail-safe timer NMI generated.
Software port NMI generated.
Explanation
Explanation
83