Using the Multipurpose
To use the area measurement tool:
1. Select the tool by clicking the Area Measurement button.
2. On the Ultrasound display, left-click the mouse at any point on the
periphery of the area to be measured.
A + marker appears on the Ultrasound display in the place where the
mouse is clicked.
3. Using the mouse, trace the periphery of the area to be measured, returning
to the starting point where the + marker appears.
4. After tracing all the way back to the starting point, left-click the mouse.
The traced area is selected and the measurement is displayed in cm
108
Simulator
(Cardiac/Abdo)
The Ultrasound Display
Vimedix
2
.
An area measurement
™