Garrick BS260 Instruction Manual page 9

kept under a suitable protective cap. If the floor is
particularly slippery, wear non-slip shoes.
· Ensure the power supply system complies with the
standards.
· Check that the outlet is suitable, complies with the
standards and is equipped with and in-built automatic
protection switch.
· If the extension lead for the electrical cable is used, this
must feature plug/socket and cable with ear thing, as
stipulated by the standards.
· Never leave the machine unattended while it is in
motion.
· Never stop the machine by unplugging it.
· Do not unplug the machine by pulling the cable.
· Periodically check the condition of the cable. Replace it
if damaged, this operation must be carried out by
authorized and skilled staff only.
· Use authorized and coded extension cables only.
· Protect the cables again high temperatures, lubricants
and sharp edges. Also avoid twisting and knotting the
cable.
· Do not allow children and strangers to touch the cable
with the plug connected.
Fig 3-Poaition of the safety signs (pictograms) on the machine.
· Should the machine exceed the acoustic pressure level
of 85 dB, suitable protections such as headphones
must be used to protect the hearing.
· Do not expose the machine to rain or use it in damp or
wet environments. Ensure that cables do not come into
contact with damp or wet areas.
·During operation of the machine, do not allow children,
people or domestic animals near the machine. Ensure a
safe distance is always kept from the machine.
·Do not use the machine or its tools for any other uses
than those for which they were designed.
·On finishing work, thoroughly clean the machine and its
working area.
· Do not tamper with or try to remove the protections.
· Only the interventions described in this manual can be
performed on the machine.
· Only authorized tools and those described in these
operating instructions or included in the Manufacturing
Company's catalogues must be used. Failure to
observe this advice means operating with unsafe and
potentially dangerous equipment.
·Operate only in suitably lit environments, in a safe and
stable position, free from any obstructions.
8