Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Workstation
Marketing Name / Model
[List multiple models if applicable.]
HP ZCentral 4R Workstation
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more than
one is provided with the product (such as a detachable
notebook keyboard battery, RTC coin cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater than
100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
With a surface greater than 10 sq cm
All types including standard alkaline, coin or button style
batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[
[X] snaps
[
[
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Flatiron PSU 90% 675W Chicony
Power Cord
HPI instructions for this template are available at
HP's Sustainability
Contact.
] screws
] adhesive
] other. Explain
EL-MF877-01
Quantity of
items
included in
product
1
1
1
1
Page 1
Advertisement
Related Manuals for HP ZCentral 4R
Summary of Contents for HP ZCentral 4R
- Page 1 Marketing Name / Model [List multiple models if applicable.] HP ZCentral 4R Workstation Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Quantity of items Item Description Notes included in product Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances...
- Page 3 29 Use PH1 screwdriver to loose the screws and remove the iron 30 Use PH1 screwdriver to loose the screws and remove the iron 31 Disconnect fan cable from MB 32. Remove the fans 33. Disconnect cables from convert board 34.
- Page 4 Step5 Step6 Remove the CPU from the board Remove memory from MB Step7 Step8 Remove Graphic card from host up Use PH1screwdriver to loose the screws Step9 Step10 Use PH1 screwdriver to loose the screws and remove Press the Graphic card’s latch and Remove it the PCIe card EL-MF877-00 Page 4...
- Page 5 Step11 Step12 Use PH1 screwdriver to loose the screws and Press the PSU’s latch on chassis and remove the PSU remove the cable from chassis Step13 Step14 Use PH1 to unscrew five screws to loosen top Slide top cover to unhook bottom chassis before cover.
- Page 6 Step17 Step18 Use PH1 to unscrew six screws to loosen PCBA Disconnect fan cable connector and LED cable from bottom chassis. connector from PCBA. Step19 Step20 Remove PCBA away from bottom chassis. Heat the solder of the Electrolytic Capacitors of greater than 2.5cm in diameter or height and Remove it Step21 Step22...
- Page 7 Step23 Step24 Remove fan from the bottom chassis by hand- Use PH1 to unscrew two screws to loosen handle- pulling upwardly. released module from bottom chassis. Step25 Step26 Use t PH1 to unscrew one cross screw and Remove metal handle away from handle-released tool#3 to unscrew one torx screw.
-
Page 8: Step32 Remove The Fans
Step29 Step30 Use PH1 screwdriver to loose the screws and Use PH1 screwdriver to loose the screws and remove remove the iron the iron Step31 Step32 Disconnect fan cable from MB Remove the fans Step33 Step34 Use PH1 screwdriver to loose the screws and remove Disconnect cables from convert board the iron EL-MF877-00... - Page 9 Step35 Step36 Press the button and remove the cable Disconnect all cables from MB Step37 Step38 Use PH1 screwdriver to loose the screws of MB from Remove MB from chassis board Step39 Step40 Use PH1 screwdriver to loose the screws and remove Remove the battery from the system board the led flatiron EL-MF877-00...
- Page 10 Step41 Step42 Press the botton Rotate the handle and open it up and remove WLAN M.2 Card Step43 Step44 Remove the HDD Press the convert board latch Step45 Remove convert board from the cage EL-MF877-00 Page 10 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...