VESTEL Westline WGE 4 WH Operating And Installation Instructions page 36

CONTENTS:
1. BRIEF PRESENTATION OF PRODUCT
2. SAFETY WARNINGS
3. INSTALLATION AND PREPARATIONS FOR USE
3.1 Environment where your appliance will be installed
3.2 Installation of product
3.3 Gas connection
3.4 Electric connection and safety
3.5 Gas conversion
4. USE OF YOUR PRODUCT
4.1 Use of gas burners
4.2 Use of hotplate
4.3 Accesorries
5. CLEANING AND MAINTENANCE
5.1 Cleaning
5.2 Maintenance
6. SERVICE AND TRANSPORT
6.1 Basic troubleshooting before contacting service
6.2 Information related to the transport
Attention: Each burner of your hob is fitted with a thermocouple safety device, in compliance with
the new legislation.
A thermal component detects the burner flame and holds the gas open. In case the flame
disappears (because a liquid overflew or there was a draught, for example), the thermal component
detects heat loss and cuts the gas inlet off from the gas valve.
To ignite a burner:
Turn the gas burner control button to maximum position. Ignite the burner with a match or lighter
or with the electric ignition button, and continue pressing the button for a few seconds (maximum
10 seconds). Release the button and make sure the flame is stable. If it's not, wait a few moments
(about 40 seconds) and repeat the process.
2