Epson TM-C3500 Series Developer's Manual page 55

Paper type
Form
Backing paper width
Label width
Label length
Gap between labels
Waste part on the left and right
Waste width
Label corner R
Black mark width
Black mark length
Black mark center position
Black mark interval
Paper thickness
Roll paper core
Outer diameter
Winding direction
• Paper with holes or cutouts cannot be used.
• For the black mark position of the die-cut label paper, match the label
c
IMPORTANT
• Both types, paper without waste part and paper without the left and right
Depending on the shape of die-cut labels, the labels may peel off their
Q
backing paper inside the printer. When you want to use die-cut labels that do
Note
not meet the specifications, contact qualified service personnel for advice.
Plain paper label / matte paper label / glossy paper label:
Roll paper
30 to 112 mm
25.4 to 108 mm
8 to 1117.6 mm
3 to 6 mm
2 ± 0.5 mm
1.5 mm or more
1.5 mm or less
13 mm or more
4 mm or more (margin part 4 mm or more)
8.5 ± 1 mm
11 to 1123.6 mm
Plain paper label / matte paper label:
0.129 to 0.143 mm
Glossy paper label:
0.184 mm
Plain paper label:
Outer diameter: 44.1 mm or more
Matte paper label / glossy paper label:
Outer diameter: 56.8 mm or more
Max. 101.6 mm
Printing surface must be facing outside.
leading edge to the black mark leading edge.
waste parts, can be used.
55