Advertisement
Quick Links
Vendor: S000107
ASSEMBLY INSTRUCTION
SANTOS 4.0' BED PINE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR SANTOS 4.6' BED
FRAME
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of the reach of children.
Always use on a level, even surface.
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all legs to stop the
bed frame from moving. If this is not adhered to there is no guarantee if the bed frame collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com
1 of 6
Advertisement
Related Manuals for Birlea SANTOS 4.0' BED PINE
Summary of Contents for Birlea SANTOS 4.0' BED PINE
- Page 1 Vendor: S000107 ASSEMBLY INSTRUCTION SANTOS 4.0' BED PINE IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR SANTOS 4.6' BED FRAME PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. HEALTH & SAFETY: DO NOT jump on this bed frame. DO NOT use this bed frame if any parts are missing, damaged or worn.
- Page 2 Vendor: S000107 Parts List Hardware List (found in box 1) Part Description Part Description Headboard foot 1/4" x 80 mm Bolt Headboard foot Elliptical Nut Headboard 7 x 100 mm Bolt Foot end 10 x 40 mm Wooden Dowel Allen Key Foot end Spacer Block 96 mm Rail...
- Page 3 Vendor: S000107 Step 1:Insert the wooden dowels (D) into the headboard (3) and rail (6), then set up the legs (1) and (2) in the headboard (3) and rail (6) setting the parts with the bolts (C) with the allen key (E). Step 2: Insert the wooden dowels (D) into the rail (6), then set up the legs (4) and (5) in the rail (6) setting the parts with the bolts (C) with the allen key (E).
- Page 4 Vendor: S000107 Step 3: Put the wooden dowels (D) in the side rails (7), then set up the footend and the headboard in the siderails (7)setting them with the bolt (A) and the Elliptical nut (B) with the allen key (E). Step 4: Put the Bracket (H) in the bed setting them in the footend and in the headboard with the screws (I) using a Philips screwdriver (Not provided).
- Page 5 Vendor: S000107 Step 5: Attach the center rail (9) to the center rail feet (10) using the screws ( J ) using a Philips screwdriver ( Not provided). Not included Step 6: Attach the center rail already set up in the bed, attach the Bracket (H) with the screws (I) as the following image, using a Philips screwdriver (Not provided).
- Page 6 If you have any issues with your item please contact the retailer directly you purchase it from who will be able to resolve any issues with Birlea. Why don’t you send us photos of your assembled furniture to info@birlea.com to be shared in our #birleahome feature on instagram.
Need help?
Do you have a question about the SANTOS 4.0' BED PINE and is the answer not in the manual?
Questions and answers