Table of Contents
Advertisement
After warning you and giving you a chance to cancel Live TV Pause
Important:
setup, all existing content on your USB drive is erased when you enable this
feature.
3. Connect your USB drive to the TV's USB port.
Important:
your Live TV Pause USB drive to any port, but make sure that nothing is
connected to other USB ports while enabling Live TV Pause. Reconnect other
USB devices after you have finished enabling Live TV Pause.
4. Enable Live TV Pause, as explained in the following topic.
Enabling Live TV Pause
You can start setting up Live TV Pause in any of the following ways:
•
After completing a channel scan, select Set up Live TV Pause [Configurar
Pausa de TV en vivo] from the available options.
•
Press Play/Pause on the Roku remote while watching a digital Antenna TV
channel.
•
Highlight the Antenna TV tile on the Home screen, press on the remote, and
then select Set up Live TV Pause [Configurar Pausa de TV en vivo].
After starting setup of Live TV Pause in any of these ways, the TV prompts you
through the steps needed to enable this feature. Setup takes only a few moments.
Use of a USB hub is not supported.
Note:
Using Live TV Pause
If you have used the Roku remote to watch streaming channels, using Live TV Pause
should be very familiar to you.
•
While watching a digital Antenna TV channel, press PLAY/PAUSE to pause or
play the content. After the TV program has been paused for 90 minutes, the
TV resumes playing.
•
After watching a channel for a while, press REWIND
point where you first started watching the channel, up to 90 minutes.
Some TV models have more than one USB port. You can connect
46
to jump back up to the
Advertisement
Table of Contents
