Setting Up A Digital Audio Connection - Philips 32PFL4765/F8 Manual

Setting up a digital audio connection

To take advantage of your TV's advanced audio capabilities, connect it to an external
amplifier, receiver, or sound bar by using either of these two digital audio
connections:
•
HDMI ARC [
®
HDMI Audio Return Channel enables the TV to output digital audio on
one of its HDMI
simultaneously as an input source to the TV, if needed. To use the ARC
capability, you must connect an HDMI
connector to the HDMI ARC connector on the TV. You also must:
o Be sure your HDMI
o Enable HDMI ARC [HDMI ARC] under Settings [Configuración] >
System [Sistema] > Control other devices (CEC) [Control de otros
dispositivos (CEC)], as explained in
•
SPDIF optical [
The SPDIF optical connector outputs a digital audio signal. To use
the optical output, connect a TOSLINK optical cable from the
amplifier to the Optical or SPDIF connector on the TV.
Dolby Audio™ supporting Dolby Digital Plus™ format is not available
Note:
through the SPDIF optical output. This format is only available through the
HDMI ® ARC connection.
After making the required HDMI
[Configuración] > Audio [Audio] > S/PDIF and ARC [S/PDIF y ARC] option and
select the audio format to use.
In most cases, Auto detect [Detección automática] is the best option. Other
Note:
settings can result in no sound when the content you are viewing does not contain
the audio stream type you selected.
(This is a physical panel label – do not translate)
®
connectors. The connected amplifier can also function
®
cable is certified by HDMI
(This is a physical panel label – do not translate)
® ARC or SPDIF optical connection, go to Settings
®
cable from your amplifier's HDMI
®
.
Enable HDMI
104
] – The
®
® ARC.
] –
ARC