Anynet+ (Hdmi-Cec) Issues - Samsung AU8000 E-Manual

Anynet+ (HDMI-CEC) Issues

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
What is Anynet+?
Anynet+ does not work.
I want to start Anynet+.
I also want the connected devices
to turn on when the TV is turned
on.
I want to exit Anynet+.
It is inconvenient to turn on other
devices because the TV also turns
on. It is inconvenient because the
connected devices (e.g. set-top
box) turn off together.
You can use the TV's remote control to control external devices that support Anynet+
(HDMI-CEC) and that are connected to the TV via an HDMI cable. For example, if a
connected external device supports Anynet+, you can have the connected device turn
on or off when you turn the TV on or off.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Check if the power cable of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC)
• Settings
Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again
or turn your TV off and on.
Move the focus to the Anynet+ device at
button to move to Anynet+
Check if the Anynet+ device is properly connected to the TV, and then select
(HDMI-CEC) menu to see if
• Settings
To turn off the Anynet+ function of a device connected to the TV, turn off the
(HDMI-CEC) function of the device.
• Settings
When Anynet+ (HDMI-CEC)
(eARC) port does not turn off and on together with the TV. To prevent a specific device
connected to the TV from turning off automatically, turn off the HDMI-CEC function
on a specific device connected to the TV.
- 184 -
Try this!
and see if Anynet+ (HDMI-CEC)
General External Device Manager
(HDMI-CEC), and then press the Select button.
Anynet+ (HDMI-CEC) is set to On.
General External Device Manager
General External Device Manager
is turned off, the sound bar connected via the HDMI
has been set to On.
Anynet+ (HDMI-CEC)
Source, press the up directional
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Anynet+
Anynet+