Samsung AU8000 E-Manual page 175

The problem
The colour is poor or the
picture is not bright
enough.
There is a dotted line on the
edge of the screen.
The picture is black and
white.
The picture won't display in
full screen.
Go to Picture and then adjust the
• Settings
• Settings
• Settings
• Settings
See if Brightness Reduction
• Settings
Try resetting the picture.
• Settings
Change Picture Size to 16:9
• Settings
Change the output resolution of your external device.
Use a composite cable when you connect AV equipment to the TV.
If you are using the composite cable, connect the video cable (Yellow) to the VIDEO (Yellow /
Green) input port.
The COMPONENT IN port may not be supported depending on the model or
geographical area.
Check whether Greyscale
• Settings
HD channels will have black bars on either side of the screen when displaying upscaled SD
(4:3) content.
Black bars will appear at the top and bottom of the screen when you watch movies that have
aspect ratios different from your TV.
Adjust the picture size options on your external device or set the TV to full screen.
• Settings
Try this!
Picture Mode, Brightness,
Picture Picture Mode
Picture Expert Settings
Picture Expert Settings
Picture Expert Settings
has been enabled.
General Power and Energy Saving
Picture Expert Settings
Standard.
Picture Picture Size Settings
is set to On.
General Accessibility
Picture Picture Size Settings
- 175 -
Sharpness and Colour
Brightness
Sharpness
Colour
Brightness Reduction
Reset Picture
Greyscale
Picture Size
settings.