Beko 674581 EB User Manual page 36

5. Keep the product in a way
that it will not tip over.
6. Do not allow children play
with the old product.
Never throw the product into fire
for disposal. There is the risk of
explosion!
If there is a lock on the door of the
product, the key should be kept out
of the reach of children.
A
1.3 - Electrical safety
The product must be unplugged
during installation, maintenance,
cleaning, repairing and moving
procedures.
If the power cable is damaged,
it must be replaced by a
qualified person specified by the
manufacturer, authorised service
agent or importer in order to avoid
potential dangers.
Do not squeeze the power cable
under or behind the product. Do not
place heavy objects on the power
cable. Power cable must not be
bent excessively, pinched or get in
contact with any heat source.
Do not use extension cords, multi-
sockets or adapters to operate the
product.
Portable multi-sockets or portable
power sources can overheat and
cause fire. Therefore, do not keep
any multi-sockets behind or near
the product.
Plug must be easily accessible. If
this is not possible, the electrical
installation to which the product is
connected must contain a device
(such as a fuse, switch, circuit
breaker, etc.) which conforms
to the electrical regulations and
disconnects all poles from the grid.
Do not touch the power plug with
wet hands.
Remove the plug from the socket
by gripping the plug and not the
cable.
A
1.4 -
Transportation safety
Product is heavy; do not move it
alone.
Do not hold its door when moving
the product.
Pay attention not to damage
the cooling system or the piping
during transportation. If the piping
is damaged, do not operate the
product and call the authorised
service agent.
A
1.5 - Installation safety
Call the authorised service agent
for installation of the product. To
make the product ready for use,
check the information in the user
manual to make sure that the
electricity and water installations
are suitable. If they are not, call a
qualified electrician and plumber to
have the necessary arrangements
made. Otherwise, there is the risk
of electric shock, fire, problems
with the product, or injury!
Prior to installation, check if the
product has any defects on it. If the
product is damaged, do not have it
installed.
5
EN