Figure 25: Slp Code Version - Ampcontrol imac itools User Manual

12. The SLP Code will now be written to the iMAC Controller and verified afterwards.
13. If the "Restart iMAC once complete" feature was ticked, the iMAC Controller will automatically re-
boot with the newly installed SLP code once the code has successfully been installed.
14. If the "Restart iMAC once complete" feature was un-ticked, a power cycle will need to be applied to
the controller, the controller will boot using the newly installed SLP code.
15. Verify the correct SLP was installed by viewing the VERSION PAGE on the Controller. The
highlighted text shows the SLP CODE version string.
The version page can typically be viewed by:
NOTE
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
H / W D A L S V 2 . 0 J U L 9 8
F / W M O N 5 V 1 . 0 M A Y 9 7
S / W O . S . V 4 . 2 O C T 2 0
S L P C O D E V E R S I O N S T R

Figure 25: SLP Code Version

1. Pressing the MENU keypad button on the controller
2. Then pressing the DOWN ARROW button until the Version
Page option is shown
3. Then press the function key: F2, F3, or F4 corresponding to the
Version Page option
Ampcontrol Pty Ltd – ABN 28 000 915 542
iMAC iTools User Manual
IMACB205 V1 – NOVEMBER/2020
Page 18 of 18