Figure 22: Slp Code Write Window - Ampcontrol imac itools User Manual

Ampcontrol Pty Ltd – ABN 28 000 915 542
iMAC iTools User Manual
IMACB205 V1 – NOVEMBER/2020
Writing SLP code to the iMAC Controller will cause all non-volatile
memory settings (such as serial port settings, slave Modbus address,
linespeed, and any SLP code specific configurations e.g. NERZ/ERZ
CAUTION!
boundary configurations, conveyor/longwall expected number of
modules online configurations etc.) to revert to default values.
Please ensure you review and revert all non-volatile
settings/configurations to the desired values following any SLP code
writes.
8. The following screen will be presented.

Figure 22: SLP Code Write Window

Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 16 of 18