Firmware Update - Fluke LinkRunner AT 1000 User Manual

LinkRunner AT 1000/2000 Network Auto-Tester
Users Manual

General Configuration:
Cable Length Unit, Meters
Auto Shutoff, Enabled

Set Language:
English
When you Select Restore Factory Defaults, you will be
prompted with a two popup. Select
The restore will be completed and the tester will turn off.

Firmware Update

Download the LinkRunner firmware update file from
1
the Fluke Networks website, or contact Fluke Networks
to get the update by other means. Save the file to your
hard disk.
Get the latest version of LinkRunner Manager from the
2
Fluke Networks website.
Start LinkRunner Manager on your PC.
3
Turn on the tester.
4
Select Tools > Firmware Update > select
5
Update.
18
 L
OK, then press .

Use the USB cable supplied with the tester to connect
6
the tester to the PC.
In LinkRunner Manager, select LinkRunner > Update
7
Software.
Click Select, find and select the update file (.zip
8
extension), then click Select.
Click Update.
9
10 When the transfer is completed, disconnect the USB
cable from the tester.
11 The screen on the tester goes blank while it installs the
update file. When the update is completed, restart the
tester.
W
Do not disconnect the LinkRunner from the PC or
remove the battery during the update.
Caution