Table of Contents
Advertisement
INSTALLATION
SOFTWARE INSTALLATION
Installing Excalibur SE System Programs
Installation of the Excalibur SE software programs is described
in the Excalibur SE Installation and Setup Instructions manual,
OP5400SPA.
When installation is complete, the Excalibur SE Program
Group, illustrated below, is available in the Windows Program
Manager window.
System Setup
There are three setup programs for Excalibur SE: System
Setup, CAD, and Icons Setup. The setup procedures using
these programs are described in the Excalibur SE Installation
and Setup Instructions manual, OP5400SPA.
The Excalibur SE System Setup program is used to define
the system information needed by all Excalibur SE system
functions. This information includes data file directories,
alarm module and switcher port setup, operators and
passwords, map sequences, sound and video access, and data
logging. This program must be run first to identify the data
directory for all other Excalibur SE programs.
The Excalibur CAD program is a drawing program used to
create the background maps and place the icons used by
Excalibur SE.
The Excalibur SE Icons Setup program provides setup
icons that reference switcher actions. This program is used
to define the attributes for each icon, such as calling a
specified camera to a specified monitor.
System Operation
There is one program for operation of the Excalibur SE
system. The Excalibur SE program (described in Section 2 of
this manual) provides the primary user interface for control
and operation of the connected Matrix Switching Systems.
This program provides all interfaces for monitoring activity
with video graphics, mouse, touch-screen, and keyboard
control.
IF YOU ENCOUNTER ANY PROBLEMS
OPERATING THIS UNIT, OR NEED ASSISTANCE,
CALL OUR TECHNICAL SUPPORT CENTER:
within the United States: 1-800-442-2225
outside the United States: (914) 624-7640
1-4
Advertisement
Table of Contents
