Table of Contents
Advertisement
Please note the following safety notes to avoid malfunctions,
damage or physical injury:
Supervise closely when the unit is used near children. Do not allow children to
use the unit.
Persons with limited physical, sensorial or mental abilities are not allowed to
use the unit, unless they are supervised and briefed for their safety by a
qualified person.
Only use the wash system as indicated in this manual. The unit is not
designed for continuous, professional use.
Never leave the wash system unsupervised when in use. Keep out of reach of
children or persons in need of supervision.
Never direct the jet towards people, animals or plants. Do not point the water
jet towards equipment containing electronic components.
Do not use water which is hotter than 60°C.
Never operate the unit on a compressor.
After use empty the detergent container and flush the unit with fresh water.
Some detergents may dry inside the unit and clog the internal ducts.
Assembly
1.
Assemble the handle, regulator, detergent container, and tilting arm as
shown in the illustration. It is important to use both extensions between the
tilting arm and the regulator.
2.
Attach either the nozzle or the brush to the tilting arm and secure it with the
wing nut. Secure all parts carefully to keep them from coming off during
operation. All parts should line up as shown in the illustration. The brush and
the detergent container should face in the same direction.
3.
Set the regulator to OFF and attach the hose to the handle via the included
connector. When necessary, detach the detergent container and fill it with
Safety Notes and Using
6
Advertisement
Table of Contents
