Teltonika TBox20 Quick Start Manual

Thank you for purchasing our device! We hope it will satisfy your expectations and you will
enjoy its particular features. Please find a few minutes to read this Quick Start Guide before
beginning to use the Alarm Monitoring and Control System TBox20. This would make the
installation and the use of the device easier. This could prevent unexpected problems and save
your precious time.
1. INTRODUCTION
TBox20 is a compact monitoring and control device for remote objects with support for
Short Messages (SMS). The device is configurable through internal WEB server interface via
GSM network and RS232 interface. Multiple users can interrogate TBox20 or be notified on
configurable events.
2. TECHNICAL SPECIFICATION
• Power 24V ±10% (for the model TBox20-2401)
• Wireless modem: Quad Band GSM (850/900/1800/1900MHz)
• 4 digital inputs ("0" (false) 0 – 1V, "1" (true) 2-24V, terminal blocks)
• 2 analog inputs. (0 – 10V max 15V, 0-20mA max 30ma, terminal blocks)
• 4 relay outputs (~250V, 7A, terminal blocks)
• Interfaces RS232 (RJ45 connector) and GSM GPRS (antenna MMCX connector)
• Alarm message service via SMS, E-Mail
• Protocols HTTP and SMTP
• Configurable through internal WEB server interface
• Watchdog controller
• Operating temperature range from -20°C to +55°C
• DIN Rail Mounting
3. PACKAGE CONTENTS
1) TBox20;
2) Serial cable PORT1 (one connector – female COM port, another – RJ45);
3) GSM antenna (MMCX connector);
4) The CD with Software and User's Manual.
Note: the manufacturer does not provide SIM card, which is necessary for connecting to the
GSM network! SIM card can be obtained from your GSM operator!
If any of the components is missing please contact your local distributor.
TBox20 Quick Start Guide