Advertisement
T
T
OUCH
RACKER
Providing System Information
1. Press Menu.
2. Using the Tracker Ball, scroll
down to System Info.
3. Press the left zoom/focus button
(line 1) or right zoom/focus
button (line 2) to select the
System Info menu option.
screen displays the following
message:
Primary Unit
4. Press Next to step through the
following messages:
5.
ROM Checksum
0A7B
Pan FSR Calibration
V l Left
Right
Min
11 22 33 44
Max
55 66 77 88
Up Down
Tilt FSR Calibration Values
Product Code
F 7000-0020-0102
Indicates Flash PROM
Product Code
E 0701-0010-0105
Indicates EEPROM
6. Press Menu to exit.
6
T
T
with Multiplexer
OUCH
RACKER
with Multiplexer, continued
The LCD
AD Touch Tracker 16
Installation Instructions
Performing SensorNet Ping
Test
1. Use the number buttons to select a
dome to reset, then press Cam.
2. Press Menu.
3. Using the Tracker Ball, scroll
down to Ping Dome/TTR.
4. Press the left zoom/focus button
(line 1) or right zoom focus
button to select the Ping Dome/TTR
menu option and test the selected
dome.
5. Press Next to perform the network
test on the Primary / Secondary
controller unit.
6. Press Menu to exit.
Off-line domes or fixed cameras will
generate a warning beep and disallow
use of the SensorNet network test.
8000-0982-02, Rev. C
Advertisement
