Advertisement
T
OUCH TRACKER
Calibrating the Tracker Ball
1. Press Menu.
The Calibration menu
option will appear on the first
line.
2. Press the left zoom/focus button
(line 1) to select the Calibration
menu option.
3. Follow the instructions on the LCD
screen.
4. Press Menu to exit.
If you do not follow each instruction
on the screen, the dome may not
function properly. Re-calibrate the
Tracker Ball if the dome does not pan
or tilt properly. Calibration is only
for the Touch Tracker controller.
Configuring Devices
1. Press Menu.
2. Using the Tracker Ball, scroll
down to Config Devices.
3. Press the left zoom/focus button
(line 1) or right zoom/focus
button (line 2) to select the
Config Devices menu option.
4. Press Next to step to the device
configuration for this
installation.
5. Press Menu to select the device
configuration and exit.
Resetting a Dome
1. Use the number buttons to select
the dome to reset, then press Cam.
2. Press Menu.
3. Using the Tracker Ball, scroll
down to Reset Dome.
4. Press the left zoom/focus button
(line 1) or right zoom/focus
button (line 2) to select the
Reset Dome menu option.
The dome will send a request to the
selected dome to reboot. After a
4
T
T
with Multiplexer
OUCH
RACKER
with Multiplexer, continued
AD Touch Tracker 16
Installation Instructions
brief delay, the controller will
return to Camera Control Mode.
8000-0982-02, Rev. C
Advertisement
