Do you have a question about the POWERDASH FH41000 and is the answer not in the manual?
Questions and answers
ray rini
February 13, 2025
Hoover FH41000not picking up water ... no suction
1 comments:
Mr. Anderson
February 13, 2025
The Hoover POWERDASH FH41000 may not be picking up water and has no suction due to the following possible reasons:
1. Obstructions in the Nozzle – Inspect the nozzle for clogs and clear any obstructions. 2. Dirty or Misaligned Parts – Ensure that all parts, including the tanks, gaskets, and seals, are clean and properly installed. 3. Thermal Protector Activation – If the cleaner has been used for an extended period, the thermal protector may have activated. Turn off the unit and allow it to cool for 30 minutes. 4. Tank Installation Issues – Ensure that both the clean and dirty water tanks are securely in place. 5. Filter Blockage – Check for any clogged filters that may be restricting airflow.
If the issue persists, professional servicing may be required.
Page 1
User Manual of Product 1: Hoover PowerDash Pet Hard Floor Cleaner Machine, Wet Dry Vacuum, FH41000, White...
Page 2
An audible be new, refurbished, lightly used, or remanufactured, in Warrantor’ s sole discretion. • To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only Hoover ® For available replacement parts and accessories, see Hoover.com and search your model number.
Page 3
• Consultez et suivez la garantie et les recommandations de Hoover sur l’ u tilisation d’ a ppareils de nettoyage pour planchers durs de lubrifiant pourrait causer des risque de blessures présenté par les dommages.
Need help?
Do you have a question about the POWERDASH FH41000 and is the answer not in the manual?
Questions and answers
Hoover FH41000not picking up water ... no suction
The Hoover POWERDASH FH41000 may not be picking up water and has no suction due to the following possible reasons:
1. Obstructions in the Nozzle – Inspect the nozzle for clogs and clear any obstructions.
2. Dirty or Misaligned Parts – Ensure that all parts, including the tanks, gaskets, and seals, are clean and properly installed.
3. Thermal Protector Activation – If the cleaner has been used for an extended period, the thermal protector may have activated. Turn off the unit and allow it to cool for 30 minutes.
4. Tank Installation Issues – Ensure that both the clean and dirty water tanks are securely in place.
5. Filter Blockage – Check for any clogged filters that may be restricting airflow.
If the issue persists, professional servicing may be required.
This answer is automatically generated