Specifications - Makita UC3041A Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Max. chain speed
Standard guide bar
Standard saw chain
Recommended guide bar length
Overall length (without guide bar)
Extension cable (optional)
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual and follow the
warnings and safety instructions.
Wear eye protection.
Wear ear protection.
DOUBLE INSULATION
Caution: particular care and attention
required!
Caution: withdraw the mains plug immedi-
ately if the cable is damaged!
Caution: kickback!
Protect against rain and damp!
Wear a helmet, goggles and ear protection!
Wear safety gloves!
Withdraw the mains plug!
First aid
Model
Bar length
Cutting length
Guide bar type
Type
Pitch
No. of drive links
Net weight
UC3041A
14.5 m/s (870 m/min)
300 mm
265 mm
90PX 91PX
46
4.6 kg
DIN 57282/HO 7RN -F L=30 m max.,3x1.5 mm
Maximum permissible length of cut
Direction of chain travel
Chain oil
Chain brake released
Chain brake applied
Prohibited!
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
The tool is intended for cutting lumbers and logs.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
8 ENGLISH
UC3541A UC4041A
350 mm
325 mm
Sprocket nose bar
90PX 91PX 90PX
3/8"
52
300 - 400 mm
455 mm
4.7 kg
400 mm
360 mm
91PX
56
4.7 kg
2