Table of Contents
Advertisement
5. Instructions
For the FR-E700 series inverters manufactured during or before the period shown by
the following serial numbers, there are restrictions mentioned below.
•
Parameter copy (
verification) does not function. Display turns into the reading indication, but reading is not
executed. If writing or verification is executed, an error occurs.
•
Initial value change list (
•
Easy setting mode (press
to change the operation mode.
•
SERIAL number check
Refer to the Instruction Manual of the inverter for the position of the rating plate.
Rating plate example
Symbol Year
Type
FR-E720-0.1K to 0.75K
FR-E720-1.5K to 5.5K
FR-E720-7.5K
FR-E720-11K, 15K
*
The parameter copy menu
inverters manufactured after the above period.
The parameter copy (
series inverters.
) is displayed, but parameter copy (reading, writing, or
) cannot be used.
and
Month
Control number
SERIAL (Serial No.)
SERIAL number
J7
K7
L7
G7
(
)
) is not displayed on this product when connected to FR-E800
simultaneously (0.5 seconds)) cannot be used
The SERIAL consists of one symbol, two
characters indicating production year and
month, and six characters indicating control
number.
The last digit of the production year is indicated
as the Year, and the Month is indicated by 1 to
9, X (October), Y (November), or Z (December).
FR-E740-0.4K to 7.5K
is not displayed on this product connected to FR-E700 series
Type
SERIAL number
D7
7
Advertisement
Table of Contents
