Before You Install; Tools And Materials Needed - Galanz GLOMJA17S2B-10 Installation Manual

BEFORE YOU INSTALL

Before you install
Read these instructions completely before installing your microwave. Make sure that your space meets the mounting
requirements and that you've gathered all needed tools and materials.

Tools and materials needed

Ducts (if venting outside)
See ''Exhaust requirements'' on page 7
Filler blocks or scrap wood pieces
(for top cabinet spacing in recessed
bottom cabinet installations, if needed)
#1 and #2 Phillips screwdrivers
Edge-to-edge stud nder
Ruler or tape measure
Pencil
Carpenter square
(optional)
Level
Duct tape
Electric drill with 3/16", 1/2", and 5/8" bits
Saw
(saber, hole, or keyhole)
Tin snips
(to cut damper, if needed)
Scissors
(to cut template, if needed)
Gloves
Safety goggles
5