Declaration Of Conformity - American Dynamics AD100 Installation Instructions Manual

Ad100 series recorder controller & ir interface hookup / software
Hide thumbs Also See for AD100:
Table of Contents

Advertisement

Declaration of Conformity

Manufacturer:
Sensormatic Video Systems Division
Manufacturer's Address:
Sensormatic Video Systems Division
1 Blue Hill Plaza
Pearl River, New York, 10965 USA
Sensormatic Electronics Corporation
State Rd. 110 Km 5.8
Poblado San Antonio
Aguadilla P.R. 00690
Declares, that the product(s) listed below:
Name/Type:
Model Numbers:
comply with the EMC Standards EN55022 (Class B), EN50082-1, and also comply with the following safety standard:
EN60950.
Each module is provided with an external power supply.
Additional information:
These products herein, comply with the requirements of the EMC Directive 89/336/EEC, and with the Low Voltage Directive (LVD)
73/23/EEC. The equipment was tested in a typical configuration.
Pearl River, NY, USA 31 January, 2000
Priscilla Sprague
Manager – Engineering Services
European Contact:
Sensormatic GmbH
Am Schimmersfeld 7,
40880 Ratingen, Germany
8000-1796-01, Rev. B
Declaration of Conformity
Sensormatic Video Systems Division
6795 Flanders Drive
San Diego, CA 92121
Sensormatic Electronics Corporation (IRL) LTD
Melbourn Road, Bishopstown
Cork, Ireland
AD100 Series Recorder Interface Modules
AD100XA-1, AD100IR16-1
Recorder Controller/Interface Installation Instructions
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ad100xaAd100ir16

Table of Contents