Table of Contents
Advertisement
Fan Doesn't Work
• Make sure power switch is on.
• Push the motor reversing switch firmly left or right to
ensure that it is engaged.
• Check the circuit breaker to ensure the power is
turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen
the canopy and check all the connections according
to the wiring diagram.
• Check the plug connection in the switch housing.
Excessive Wobbling
• Make sure the blades are properly installed on the
blade iron posts.
• Turn the power off, support the fan carefully, and
check that the hanger ball is properly seated.
• Use the provided balancing kit and instructions to
balance the fan.
Noisy Operation
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so,
replace all of the blades.
If you need a different downrod length follow these steps:
1
1
10
10
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
Remote Control of Fan is Erratic
• Make sure the battery is installed correctly.
• Install a fresh battery.
Remote Only Works Close to Fan
• Change battery.
Multiple Remote Issues
• If you have multiple remotes or multiple remote-
controlled fans installed on the same circuit breaker
and you are experiencing interference or faulty
operation of your remote controls, please go to
www.HunterFan.com/FAQs and click
properly install multiple remote-controlled fans?"
information on how to correct this issue.
Follow steps 1-5 to remove standard downrod pipe
2
3
8
9
2
9
8
Follow steps 6-10 to reassemble with new downrod
• VERIFY the downrod
• ALWAYS follow the
is assembled correctly
downrod assembly
by firmly pulling on the
instructions exactly.
hanger ball.
Troubleshooting
"How do I
Downrod
4
3
7
4
7
• Pin must be reinserted
to secure downrod
assembly.
for
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.
5
5
6
Here is another view of
the downrod assembly
unassembled.
6
Assembled downrod
should look like this
1886
Pin
Pin
10
Advertisement
Table of Contents
