Safety Information - Kobalt 10011 Manual

9-drawer mobile workbench
Table of Contents

Advertisement

Available languages

Available languages

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or operate this
product. Failure to follow may result in serious injury. Save all warnings and instructions for future
reference.
WARNING
• Do not stand or step on this product. You may fall which may cause personal injury or product
damage.
• When locking the product, close the drawers completely in order for the lock bar to work properly.
• Lock wheels when the product is not being moved
• Secure this product properly before moving it with a forklift.
• Do not attach or mount this product to a vehicle. This may cause personal injury or product
damage.
CAUTION
• Do not exceed the maximum drawer weight, wood top or total product weight, including contents.
Always balance the loads to avoid tipping. Place the heavier weights on the bottom drawers when
possible.
• Be careful when opening more than one drawer. The product may become unstable and tip,
which may also cause personal injury or product damage.
• Keep the product on level surfaces. The product may become unstable and tip if stored or moved
on an unlevel surface, which may cause personal injury or product damage.
• Secure all items and lock all drawers before rolling this product. Only roll the product short
distances by using the handle provided.
• Two people are needed to safely move this unit.
• Do not store liquids in the unit unless they are secured in an approved container.
• Keep children and bystanders away while loading, unloading, and moving the product.
• Always use common sense and be cautious when using this product. Do not modify this product
in any way.
• Follow all below information for extension cord
Do not insert extension cord through hole without grommet in place.
Only use a three-wire extension cord with all three prongs intact. Never remove the round
grounding prong.
Extension cord must be connected to a 125Volt GFCI protected outlet with proper ground. If GFCI
outlet is not available, use an extension cord with GFCI protection built in.
Check the insulation and plugs of extension cord before using. Do NOT use cord if it is worn or
damaged.
Do not overload extension cord.
Remove extension cord from the hole before moving or transporting storage chest.
Do not connect extension cord to outlet that also supplies critical safety equipment with power.
Make sure the power supply cord is unplugged before any servicing or cleaning.
5

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

2462438

Table of Contents