Safety Information - Kobalt 0827415 Manual

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• Do not stand on this product. You may fall or cause product to tip.
• Do not open more than one drawer. The product may become unstable and tip.
• Do not step in the drawers. You may fall or cause product to tip.
• Do not mount this product on a truck bed or any other moving object.
• Do not move the product prior to closing and locking all the drawers. The drawers could
come open and make the product unstable and tip.
• Wear safety glasses when removing or repositioning the slides.
• Do not pull the unit. Push the unit when moving. Pushing the unit will prevent serious
ankle and foot injuries.
• Use the brakes when not moving this product. This will prevent the product from rolling.
• Do not alter this product in any manner. For example, do not weld external lockbars or
attach electrical equipment.
• Keep the product on level surfaces. The product may become unstable and tip if stored
or moved on an uneven surface.
• Be careful when closing drawers.
CAUTION
• This product is not designed to be directly lifted with a forklift or to be towed with any
mechanical devices.
• Do not exceed the maximum weight capacity for each drawer or shelf. See Capacities
for more information.
• This product should be empty when transporting by vehicle. Properly secure when
transporting.
• Do not exceed maximum product weight, including contents. See Capacities for more
information.
• As with all metal products, this product can contain burrs and sharp edges. Wear pro-
tective gloves.
• Use adequate manpower when assembling and moving this unit. Failure to do so may
cause personal injury or product damage.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assem-
ble the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): 3/8-in.Wrench, 7/16-in.Wrench, Phillips Screwdriver
3
kobalttools.com