Maquet SERVO-air User Manual page 49

4.1.2 Advanced view
The view consists of:
• two to three waveforms – pressure and flow
waveforms are always present, together
with the volume waveform, if desired
• two columns of numerical values
Note: All invasive ventilation modes start in
the ADVANCED view.
It is possible to adjust the layout by tapping
either SCREEN LAYOUT in the extended menu
or VIEWS/Screen layout in the quick menu.
Refer to section Adapting the waveform
display on page 51.
SERVO-air Ventilator System v2.2, User's Manual
4.1.3 Loops view
This view provides a graphical representation
of the relationship between pressure-flow,
pressure-volume and volume-flow.
The view consists of:
• up to three loops – pressure-flow,
pressure-volume and volume-flow
• two to three waveforms – pressure and flow
waveforms are always present, together
with the volume waveform, if desired
• two columns of numerical values
Note: The LOOPS view is not available in
non invasive modes.
It is possible to adjust the layout by tapping
either SCREEN LAYOUT in the extended menu
or VIEWS/Screen layout in the quick menu.
It is also possible to adjust the scaling, sweep
speed, appearance of the waveforms and user
interface brightness in the SCREEN LAYOUT
window.
Refer to section Adapting the waveform
display on page 51.
| Displaying and saving data | 4 |
49