Specifications; Initial Tool Set Up/Assembly - Central Machinery 67090 Owner's Manual & Safety Instructions

procedures not explained in this manual or
any procedures that you are uncertain about
your ability to perform safely or correctly.
29. Do not allow anyone to operate the Log
Splitter who has not read this manual or
has not been instructed on the safe use of

Specifications

Initial Tool Set Up/Assembly

Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including all
text under subheadings therein before
set up or use of this product.
Assembly
1. To assemble, insert one Jack Handle (3) into
each of the sockets on the Ram (9). See
Figure B.
Item 67090
SAVE THESE INSTRUCTIONS.
Log Cutting Capacity
(Maximum)
Minimum Log Length
Ram Stroke
For technical questions, please call 1-888-866-5797.
the Splitter. The Log Splitter owner should
instruct all operators in safe Log Splitter
operation.
30. Store equipment out of the reach of children
and other unauthorized persons.
18" L / 6-1/2" Dia.
13-1/2" L
8-1/16"
Note: For additional information regarding the
parts listed in the following pages, refer to the
Assembly Diagrams near the end of this manual.
Note: The Log Splitter is heavy; use care and
proper lifting techniques when move the Log
Splitter.
Jack
Handles (3)
Ram (9)
Socket
Figure B
Page 4